TECNO I3 FRP RESET FILE WITH SP FLSH TOOL FREE_By Benedictor Kagolo2020
TECNO I3 FRP RESET File_By Benedictor Kagolo2020
Download Tecno I3 FRP File. Official Firmware ROM. The given firmware file of TECNO Phone the original file and it is in the scatter file, which describes how to flash and driver Install from SP FlashTool. Here is how to Flash TECNO Mobile with a Scatter file, which is given below in full detail. How to Flash Manual.
LINK TO DOWNLOAD FILE
PASSWORD
benphonerepair
FILE SIZE
366 KB
How to Flash TECNO Phone:
Download Tecno I3 FRP File and Install Mediatek Driver, Charge the phone 30% before flashing.
- First download all the files above
- Extract All File From Zip File.
- Open the FlashTool folder and run flashtool.exe.
- After that open, the tool, click on choose in the download agent tab.
- And select the MTK_AllInOne_DA.bin file from the FlashTool folder.
- After that click on choose in the scatter-loading file tab and select the scatter file from the flash file folder.
- Then click on the download button
- Then switch off the phone to connect the phone to Flashtool.
- According to the boot mood of the phone, press the button and connect the data cable with the phone.
- The option of the green tick will come after flashing is complete.
How to FRP Bypass:
Download Tecno I3 FRP File and Install Mediatek Driver
- Open the sp flash tool and select the scatter file from the given flash file.
- Click on the above format
- After that click on manual format flash
- Open the file named scatter in the firmware folder and search for FRP by pressing control + F
- Copy the “Begin address” and “format Length” and paste in the manual option
- (Ex: Begin address 0x2d88000 and Format Length 0x100000)
- After that click on the Start Play button and connect the phone to your computer .
FOR ANY QUESTION
+255676096002
+255734 096002
No comments