DOWNLOAD HUAWEI P SMART 2021 PPA-LX2 10.1.1.172 FLASH FILE FIRMWARE By Benedictor Kagolo2020
Hi! All GSM Friends, I know you must search HUAWEI P SMART 2021 PPA-LX2 flash file firmware. our page you find HUAWEI P SMART 2021 PPA-LX2 tested virus prevention customer care signed flash file firmware uploaded. Not forgery of wrong firmware. This flash file is original, tested & trusted firmware. if it ever gets any firmware related issue, Dead issue, fastboot issue, LCD issue, Hang issue,you can also use the firmware to flash your android smartphone.
Read Info: HUAWEI P SMART 2021 PPA-LX2 10.1.1.172 FLASH FILE FIRMWARE By Benedictor Kagolo2020
If you find any of our files are not working properly in your mobile phone, then contact us and tell us about your problem, we believe we can solve your problem as soon as possible.
ABOUT PHONE :-
BRAND :-HUAWEI
MODEL:- PPA-LX2
CPU TYPES:-QUALCOMM
THIS FILE HELP YOU TO FIX THE FOLLOWING ISSUES:-
*Fix Hang On Logo / All App
*Remove FRP /Password / Pin Or Patten
*Remove Network Lock ( Unlock Network )
*Dead After Flashing Wrong File
*Black Screen After Flashing
ETC:
STEPS TO INSTALL HUAWEI PPA-LX2 FLASH FILE
If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Huawei P Smart 2021 PPA-LX2. Make sure to follow the steps carefully.
Pre-Requirements:
This ROM is supported for the Huawei P Smart 2021 PPA-LX2 variant only.
Make sure that your device should be charged at least 50% or higher.
You will require a PC or Laptop with a USB Data Cable.
We always recommend our readers take a full data backup of the device for safety purposes.
Disclaimer:
GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk
Firmware Installation Guide:
Check out the firmware flashing guide below for the Huawei P Smart 2021 PPA-LX2.
1. SD Card Update Method
Create a new folder called dload on your MicroSD card.
Extract the downloaded firmware zip file on PC > Copy the UPDATE.APP file into the dload folder on your MicroSD card.
Switch off your handset > Long-press Vol Up + Vol Down + Power key together for a few seconds until the fastboot mode appears.
You’ll see ‘Installing system update’ > Wait for a while > Your device will automatically reboot after flashing.
2. Manually Flash Stock ROM
Launch the QPBLFBML01.exe file to open the Huawei Multi-Download Tool.
Next, you will see the XML firmware file upload option.
Click on the Browse button (three-dot icon) and it will ask for the password.
Don’t put anything, just leave it blank and click on the Set button.
Now, select the .xml firmware file for your device and click on Open.
Then click on the Next button.
You will see the installation progress page. Connect your device via a USB cable with the Fastboot or Download Mode.
Next, click on the Scan&Download button to start flashing the stock firmware.
It will automatically detect the Fastboot device and will take some time to install it.
Once flashing done, restart your device
LINK TO DOWNLOAD FIRMWARE
Password:- benphonerepair
Brought to you by BEN PHONE REPAIR powered Benedictor Kagolo, If you find it useful don't forget Comment at comment section below. You can also Visit Our YouTube channel to get free video tutorials, Don't Forget to SUBSCRIBE Ling below
Whatsapp: +255 676 096 002 or +255 734 096 002 For complain or request
No comments